Adcol Electronics (Guangzhou) Co., Ltd.
Adcol Electronic (Guangzhou) Co., Ltd.
Add to Cart
Peltier Chiller Perfect Cooling Solution Thermoelectric Chiller For Photonic Laser System
Adcol Chiller design with Adcol Thermoelectric Liquid Cooler engine, build in precision temperature control system, up to +/-0.1 . Widely used in medical , photonics and semiconductor industry. Cooling capacity is 150W , 300W or as per customer's request.
Chiller can keep injection & Blowing machine in low temperature, so the machine can produce more and better quality products
The Benefits of Thermoelectric Cooling
· NO ICE REQUIRED FOR COOLING
· They allow for very tight and accurate temperature control
· No moving parts . Therefore they require little or no maintenance . Ideal for cooling parts that may be sensitive to mechanical vibration .
· No refrigerants , Therefore environmental and safety benefits
· Enables reduced, low-noise operation of cooling fans, while providing greater cooling power
· Allow for systems to be lightweight and compact due to their small size
· Long life
· Controllable (by voltage / current)
· Fast , dynamic response.
· Can provide cooling below ambient temperature
Application
Medical Imaging System
Medical lasers
Photonic Laser System
Machine tool
Industrial Instrument
Laboratory Test
3D Printing
| Model | ARC450 |
| Input voltage | 90~265VAC |
| Frequency | 50/60 Hz |
| Operating environment temperature range | -10~45°C |
| Operating Humidity | 20~85% |
| Control temperature range distilled H2O as coolant | 4-50°C |
| Control temperature range, using 75% distilled H2O and 25% glycol or alcohol as coolant | 0-50°C |
| Controller accuracy | ±0.1 |
| Cooling Capacity | 450Watts |
| Heating Capacity | 550Watts |
| Current, 115VAC (230VAC) | 5.6A (3.0A) |
| Input power | 645Watts |
| Fluid Pressure | 0-40 PSI |
| Maximum Flow Rate | 6 LPM |
| Storage temperature range °C | -40~75°C |
| Storage Humidity | 5~95% |
| Heat Radiation | Air Force |
| No | Name | Description/Spec |
| 1 | Handle | Metal,Black |
| 2 | Filler Cap | Plastic |
| 3 | Coolant outlet | PLCD 16006 |
| 4 | Coolant inlet | PLCD 16006 |
| 5 | Power entry | C14,250VAC 10A |
| 6 | RS Connector | RS 485 |
| 7 | Controller | PID |
